Advanced Mouldmaking And Casting Book PDF, EPUB Download & Read Online Free

Advanced Mouldmaking and Casting
Author: Nick Brooks
Publisher: Crowood
ISBN: 1847977235
Pages: 160
Year: 2013-12-21
View: 804
Read: 673
The scope and potential of mouldmaking and casting is fascinating, and makes it one of the most exciting processes available to today's craftsmen. Its opportunities have been developed and expanded further by a range of new methods and materials only recently made available to the domestic market. Aimed equally at the student with little pre-existing knowledge and the professional wishing to further their skill base, this book provides an invaluable learning and reference tool for the studio or workshop of any artist, model maker or designer. Covers: jesmonite mould making and casting, bioresin casting, life moulding silicone from the body, large-scale clay press moulding, embedding in clear resin, clay slip casting, plas-ti-shim moulding, and finishing. Supported by step-by-step sequences and full descriptions of traditional processes as well as new methods, it is illustrated throughout with 212 colour photographs.
MouldMaking and Casting
Author: Nick Brooks
Publisher: Crowood
ISBN: 1847977308
Pages: 176
Year: 2013-12-21
View: 583
Read: 737
Mouldmaking and Casting is a technical manual of the many techniques of this ancient craft and art form. With step-by-step illustrations, it explains the materials required and the processes involved to create reproductions of a range of pieces. The book covers traditional techniques as well as today's more advanced technical methods.
The Essential Guide to Mold Making & Slip Casting
Author: Andrew J. Martin
Publisher: Sterling Publishing Company
ISBN: 1600590772
Pages: 159
Year: 2006
View: 1278
Read: 491
Previously published as: The definitive guide to mold making & slip casting. San Rafael, Calif.: MAGUS Art Pub. & Workshops, c1999.
Mould Making for Glass
Author: Angela Thwaites
Publisher: A&C Black
ISBN: 140811433X
Pages: 128
Year: 2011-10-19
View: 675
Read: 1010
Nearly all glass makers (unless they are blowing glass) need moulds which can go in the kiln, as part of the process of creating their work. Currently glass students and makers get their expertise and recipes from lots of different sources, picking out the relevant bits and pieces which they need from other glass and ceramic books. This book aims to introduce all the mould-making techniques for casting glass, with detailed information on materials, recipes for mould mixes, methods and applications. It helps the student to learn which methods are appropriate for different types of work, and covers all the basics of how to make your mould. It also includes practical information on sourcing, storing, using and recycling materials, and how to develop your own recipes and methods for particular projects. It also covers where to start with writing programs for kiln firings including annealing and cooling. It also contains images from well-known artists working in cast glass throughout.
Mold Making, Casting & Patina
Author: Bruner Felton Barrie
Publisher: Sculpture House
ISBN: 0963186701
Pages: 116
Year: 1992
View: 625
Read: 556
This is a unique publication designed for the amateur sculptor. The comprehensive areas covered include plaster waste molds, for single casts; latex rubber molds, for multiple casting; polyurethane molds for wax casting in bronze; & moulage molds, for casts of life subjects. The text also includes extensive guidance in the repair of casts, as well as mounting for display, & the art of patina, or coloring. The format is designed to make the text easy to read with step by step instruction on all phases of the mold making, casting, & patina process. There are more than 75 line drawings & over 200 black & white photographs showing clearly everything needed to make exacting casts of the original piece of sculpture. The text & illustrations have been designed as a guide to show & describe exactly what the user will be seeing & experiencing as it occurs in front of them. The author, Mr. Barrie, is a member of The National Sculpture Society, in New York City & The International Sculpture Center in Washington, D.C. Mr. Barrie has worked in stone, clay, wood, wax, plaster & plastilina. He has more than twenty years of experience with mold making & casting. To order: FAX 609-466-2450, PHONE 609-466-2986.
Modeller's Guide to Mould Making and Resin Casting
Author: Alex Hornor
Publisher: Lightning Source Incorporated
ISBN: 1906512574
Pages: 106
Year: 2010
View: 948
Read: 367

The Prop Builder's Molding & Casting Handbook
Author: Thurston James
Publisher: Betterway Books
ISBN: 1558701281
Pages: 238
Year: 1989-11-15
View: 797
Read: 688
The Prop Builder's Molding & Casting Handbook &break;&break;This is the first book to contain, in one comprehensive volume, every molding and casting procedure of use to the theater props builder (no matter what his or her level or proficiency). The author demonstrates the techniques involved in using more than thirty different materials ranging from papier-mache to breakaway glass. &break;&break;While the use of some materials–plaster and polyester resins, for example–is covered to some extent in other publications, information on the selection and use of rubber materials (latex, neoprene, silicone, and the urethanes) and the procedure for making breakaway windows and bottles is available only in The Prop Builder's Molding & Casting Handbook. &break;&break;Written in an easy, conversational style, the book will be useful to anyone involved with theater properties, puppetry, and costuming (as professionals or amateurs). It will also serve admirably the needs of students taking classes in those subjects. &break;&break;Completing the book is a special section on designing and building a vacuum forming machine suitable for use in constructing theater props. More than 450 photographs illustrate the step-by-step procedures explained throughout the entire text.
Slipcasting
Author: Sasha Wardell
Publisher: University of Pennsylvania Press
ISBN: 0812219988
Pages: 144
Year: 2007-07-05
View: 614
Read: 817
Best known as one of the most widely used industrial ceramic techniques, slipcasting has become increasingly attractive to individual artists and craftspersons. Slip, a water and clay solution, is poured into porous molds. As the mold absorbs water from the slip, a layer of clay forms a cast. The excess slip is removed from the mold and the cast is stiffened, removed, dried, and fired in a kiln. Since the molds can be based on anything from delicate sculpture to found objects, slipcasting frees artists from the constraints of other ceramic techniques while allowing them to create multiples of their works. Sasha Wardell's Slipcasting is a straightforward, practical guide for those interested in the boundless possibilities of the technique. The book contains more than one hundred color illustrations, diagrams, and slip formulas. An inspiring "Individual Approaches" chapter discusses the slipcast work of a variety of contemporary ceramicists from around the world.
Plaster Mold and Model Making
Author: Charles Chaney, Stanley Skee
Publisher: Van Nostrand Reinhold
ISBN: 0671764675
Pages: 144
Year: 1978-07-01
View: 261
Read: 486

Setting You Up for Success
Author: Stan Farrell, Michelle Miller, Shawn Lemelin
Publisher: Createspace Independent Publishing Platform
ISBN: 1519146566
Pages: 130
Year: 2015-11-05
View: 634
Read: 1236
Follow along as we inspire and educate about the mold making process with these Reusable Mold Making Materials. Stan Farrell, President of ComposiMold, was educated in material science and has been researching advanced composites for the past 12 years. The idea for the composite mold making material initially came from his inability to find a better material for making model airplane components. From there, he developed the ComposiMold and other ideas have grown. We expect more composite products will come as ComposiMold grows. Michelle Miller, Art and Outreach Director, is a graduate of the Maine College of Art with a BFA in Graphic Design and Media Arts. Her aesthetic sensibilities are invaluable to the ComposiMold Team. Shawn, Process Manager, is a graduate from University of Southern Maine in Industrial technology and management. Prior to working with Wizbe Innovations, Shawn worked in the electronics industry while completing his undergraduate work.
Secrets of Expert Mold Making and Resin Casting
Author: Karl K. Juelch, Jessica L. Minzner
Publisher: Createspace Independent Pub
ISBN: 1492294942
Pages: 120
Year: 2013-10-14
View: 765
Read: 1117
Learn how to make professional quality molds, then use those molds to make precise, flawless castings. Reproduce virtually any three dimensional object once, twice, dozens or even hundreds of times. Informative text and over 100 highly detailed line drawings guide the reader from the basics to very advanced procedures. Emphasis is on low cost materials and equipment ideally suited to the individual artisan or small business owner. A very wide range of artists, crafts and trades people, design professionals and entrepreneurs can use these techniques to increase their productivity and profits. This book is the result of years of research, experimentation and daily use in a professional shop environment.
Glass casting and moldmaking
Author: Boyce Lundstrom
Publisher: Vitreous Group
ISBN:
Pages: 143
Year: 1989
View: 787
Read: 804

Mold Making for Ceramics
Author: Donald E. Frith
Publisher: A & C Black
ISBN: 0713651482
Pages: 228
Year: 1992
View: 961
Read: 274
A reference and practical book demonstrating the craft of making and using all types of moulds whether they are made of plaster, Styrofoam or wood. Step-by-step directions and photographs illustrate their use and two calculators - one of volume and mix and another a shrinkage compensating devise - accompany the book.
Complete Casting Handbook
Author: John Campbell
Publisher: Butterworth-Heinemann
ISBN: 0081001207
Pages: 1054
Year: 2015-08-06
View: 842
Read: 716
Campbell’s Complete Casting Handbook: Metal Casting Processes, Techniques and Design, Second Edition provides an update to the first single-volume guide to cover modern principles and processes in such breadth and depth, while also retaining a clear, practical focus. The work has a unique viewpoint, interpreting the behavior of castings, and metals as a whole, in terms of their biofilm content, the largely invisible casting defects which control much of the structure and behavior of metals. This new edition includes new findings, many from John Campbell’s own research, on crack initiation, contact pouring, vortex gates, and the Cosworth Process. Delivers the expert advice that engineers need to make successful and profitable casting decisions Ideal reference for those interested in solidification, vortex gates, nucleation, biofilm, remelting, and molding Follows a logical, two-part structure that covers both casting metallurgy and casting manufacture Contains established, must-have information, such as Campbell’s ‘10 Rules’ for successful casting manufacture Includes numerous updates and revisions based on recent breakthroughs in the industry
The Clay Lover's Guide to Making Molds
Author: Peirce Clayton
Publisher: Lark Books (NC)
ISBN: 1579900224
Pages: 128
Year: 1998
View: 770
Read: 841
The complete guide to creating and using plaster molds for both beginning and expert clayworkers. Every aspect is covered, from the basics to a number of fascinating projects for all levels. Black-and-white "how-to" photographs clarify every step. A color gallery offers encouragement and inspiration. 120 color photos. 175 b&w photos.

Recently Visited